Product Details :
Product Name |
Calcium Chloride Dihydrate |
C.A.S. No. |
10035-04-8 |
Molecular Formula |
CaCl2.2H2O |
Molecular Weight |
147.01 g/mol |
SPECIFICATION |
IP |
BP |
USP |
Description |
A White, Crystalline powder or fragments or granules, odorless, hygroscopic. |
White or almost white, crystalline powder, hygroscopic. |
White or almost white, crystalline powder, hygroscopic. |
Solubility |
- |
Freely soluble in water and soluble in ethanol (96 %) |
- |
Appearance of solution
|
Clear and not more intensely colored than reference solution YS6. |
10 % solution is clear and not more intensely colored than reference solution Y6. |
- |
Identification
|
|
|
|
Acidity or Alkalinity |
To 10 ml of freshly prepared 10 % w/v solution add 2 drops off phenolphthalein solution. Titrate with 0.01 M hydrochloric acid or 0.01 M sodium hydroxide. |
If the solution is red , than not more 0.2 ml of 0.01 M HCL need to discharge the color and if the solution is colorless, not more than 0.2 mlNaOH is required to turn it red. |
- |
pH |
- |
- |
4.5 - 9.2 |
Arsenic |
NMT 3 ppm. |
- |
- |
Barium |
After not less than 15 min. the solution is not more opalescent than a mixture of 10 ml of solution and 1 ml of distilled water. |
After 15 min, Any opalescent in the solution is not more intense than that in a mixture of 1 ml of distilled water and 1.0 gm of sample. |
- |
Aluminum&Phosphate (IP) |
No turbidity or precipitate is produced. |
No turbidity or precipitate is formed. |
NMT 1 ppm |
Iron , Aluminum & Phosphate |
- |
- |
No turbidity or precipitate is formed. |
Heavy metals |
NMT10 ppm |
- |
NMT10 ppm |
Iron |
NMT 20 ppm. |
NMT10 ppm |
- |
Magnesium and Alkali salts |
NMT 1.0 % |
NMT0.5% |
NMT 1.0 % |
Sulphate |
NMT 300 ppm |
NMT 300ppm |
- |
Organic Volatile impurities |
- |
- |
Meets the requirements |
Assay |
97.0 % to 103.0 % |
97.0% - 103.0% |
99.0% - 107.0% |
YOGI CHEMICAL INDUSTRIES
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |